Categories

Contact Us

Antop Global Technology Co., Ltd.

Add: Room 822, Shoucheng International C, Guangqu Road, Chaoyang District, Beijing, China.

Tel: +86-10-60769020

Fax: +86-10-60769020

Mobile: +86-13511070025

E-mail: emmasi@antopglobal.cn

GFRP Rockbolt Fiberglass Rebar

- Oct 28, 2017 -

Fibre-reinforced plastic (FRP) (also fibre-reinforced polymer) is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually fibreglass, carbon, basalt or aramid, while the polymer is usually an epoxy, vinylester or polyester thermosetting plastic. FRPs are commonly used in the aerospace, automotive, marine, and construction industries.
ANTOP GFRP main advantage:

All-Thread FRP Bolt: The rod is threaded over the whole length, i. e. "All-Thread";

High Corrosion Resistance: The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials;

High Tensile Strength: The load is approximately double that of a steel bar with the same diameter;

Low Weight: The weight is only 1/4 that of a steel bar with the same diameter. Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time;

Anti-static: It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones;

Non-flammable: It is non-flammable and has high thermal isolation;

Cuttability: It avoids damages to cutter heads, and does not delay excavation.

Related Products